Description
How to use
In relation to the damage to be repaired and the level of finish
you want to get it pass onto the surface from two to four grains
in succession.
To restore a polished marble ruined by scratches or severe
corrosion begins with the plate # 200, continuing with 400 and
800 grit up to 1500 grit and then passing the polishing powder.
The diamond plates are used on wet surface
rubbing in a circular motion with moderate pressure alternating
repeated several times. Given a uniformly smooth area to go to
the next grit until you reach the desired smoothing.
The polishing powder should be passed after the use of the
patch # 1500 grit to get so perfect a real mirror polishing.
GREAT WITH THE NEW BACKED VELCRO PAD!
KIT POLISHING RESTORE
for restoring worn surfaces from scratches, spots of corrosion or fouling
In package 4 diamond plates size 4×4.5×0.3 cm, grits 200# 400# 800# 1500#, 1 pad with back velcro, 1 small bag polishing powder
Tools to easy manually polish marble, limestone and all stones.
WHAT IT IS:
To manually polishing restore of marble, travertine and limestone ruined by scratches, corrosion, limescale, etc.
Great for polishing restoring bathroom or kitchen countertops, floors in marble or limestone
At this address you will find lots of information on indications for use, how to use and a video showing the procedure for restoring the surfaces: Marble Restoration.
Package Contents
The package contains the following items:
n. 4 diamond plates in grits 200 # 400 # 800 # 1500 #
n. 1 buffer velcro backed
n. 1 bag 50grams of powder for polishing marble
Technical notes:
Diamond plates: mini plates size S dim. 4×4, 5×0, 3 cm. With
diamond resin abrasive for sanding (200 grit orange, 400 grit
red, green grit 800), polishing (1500 grit light green). The
plates have the back with colored velcro to recognize the grain.
Buffer: block of soft plastic material velcro back hook size 4,2
x5x2 cm.
Polishing powder: special powder for polishing marble and
carbonate stone. This is a special blend of professional powders
that are used usually with heavy sanding machines; in the
formulation contained in the kit also works hand. It must be
used wet