Concrete Applications:

  • Waterproof basement walls and floors, garage floors
  • Stop leaks and water seepage in swimming pools, sidewalks, driveways, patios

Marine Applications:

  • Seals & fills leaks & cracks on all wooden surfaces
  • Two-part, high-solids, liquid epoxy
  • Apply on dry or damp surfaces of wood, fiberglass, concrete, steel, aluminum
  • Excellent adhesion and wear properties
  • Paint can be applied after light sanding

Pour the entire contents of the smaller container (Hardener) into the larger can containing the Resin
and mix thoroughly. Mix must be used within 30 minutes at 70F (21C) to 80 F (27C) or contents will 
harden in the can. Apply a heavy coat with a 2″ to 3″ paint brush over the problem areas. Allow 10 hours for drying at 75 F (24C). At temperatures below 75 F(24C), drying time will be extended. DO NOT APPLY WHEN TEMPERATURE IS BELOW 60 F (16C)

Out of stock


Below Grade Walls and Floors – In basements, water seepage usually occurs at the wall-floor
intersection. A heavy coating of EPOXYBOND WATERPROOF SEALANT should be applied at the
junction of the wall and floor extending at least 6 inches onto the floor and at least one block high on the wall. If the area of leakage can be pinpointed, extend the coating at least three inches past this point. On porous surfaces, such as cinder block, coverage will be less (approximately 25 sq. ft. per one quart unit).
Two coats are recommended. Apply second coat within 48 hours. If second coat is applied after 48
hours, the surface must first be sanded and cleaned. Although EPOXYBOND WATERPROOF SEALANT
can be applied to a damp surface, the drier the surface being coated, the better the protection. Flowing water must be sealed with a quick setting hydraulic cement before applying EPOXYBOND WATERPROOF SEALANT.

Outdoor Applications
– Apply a topcoat using a good commercially available outdoor paint because
ultraviolet rays from the sun will cause chalking and embrittlement. EPOXYBOND WATERPROOF
SEALANT may be painted after allowing to dry for 24 hours. Prior to painting, wash the surface with soap and water. After it has been in place for more than one week or if exposed to excessive high humidity during application, a blush may appear on the surface.

Additional information

Weight 401 kg